Skip to main content

Getting Started

This guide walks you through the initial setup and connection process for your Pixout HDMI ArtNet Converter.

Default Network Settings​

Out of the box, your device has the following default network settings:

Ethernet Connection​

SettingValue
IP Address2.0.0.230
Subnet Mask255.0.0.0
Outgoing IP2.0.0.5
info

Outgoing IP is the address from which ArtNet DMX data will be sent after video conversion.

Wireless Connection​

SettingValue
IPDHCP
ZeroConfig URLhttp://pixoutconverter.local/

Connection Setup​

Follow these steps to connect to your Pixout HDMI ArtNet Converter:

  1. Connect the Converter to your PC with an Ethernet cable
  2. Power up the Converter
  3. Configure a static IP on your PC:
    • IP: 2.0.0.x (any value except 230 and 5)
    • Mask: 255.0.0.0
    • Gateway: 0.0.0.0
  4. Open your browser and navigate to http://2.0.0.230/px-admin/#/network
  5. Enter your wireless router credentials (SSID/Password) in the Admin Panel
  6. Once connected to WiFi, access the device via http://pixoutconverter.local
Windows Users

If you use Microsoft Windows, install Bonjour drivers first to support URLs like http://pixoutconverter.local/ in your browser. Download from: pixout.lighting/downloads

Access Points​

PanelURL
User Panelhttp://pixoutconverter.local/
Admin Panelhttp://pixoutconverter.local/px-admin
info

You can use both Ethernet and Wireless connections to control the Converter remotely.

Next Steps​